Small Cable Cut And Strip Wire Machine Process Automatic Wire Stripping Machine Copper Cable Cutting Machine
The Loong Series Harness Manufacturing can produce more wire harnesses of varying degrees of complexity.
It has the functions of Both-end measuring cutting, Both-end striping, Both-end crimping, Both-end Insertion and so on.
Reduce production time significantly.
3 or 12 modules can be selected, as required. The Loong Series is a better choice for miniaturization and increasingly
smaller batches.
These machines make it possible to manufacture a range of different wire harnesses.
Wide variety with up to 36 wire types
The different wire types for versatile wire
harness production are available on the
Loong machines without the need for
changeovers. The automatic wire changer
provides up to 36 different wires from the
entire cross-section range. This enables the
range of wires required in the construction of control cabinets,which to be covered perfectly.
Equipment Configuration
With the German high pixel image detection system
Module(THK),Electric(YASKAWA),Cylinder(SMC),Sensor(Omron),CCD Camera(Germany Basler),Reducer(Xinbao)
The maximum speed can reach to 1000pcs/hr
Equipment Function
It can process 35 different specifications and colors of wire
Terminal visual detection system,pressure inspection,insertion drawing force detection
Double-end crimping with the function of double-end housing Insertion
Simultaneous multiple housing insertion
Technical Parameters
| Mechine Function | Fixed length cut at both ends, Peel off, Double-end crimping, Double-end insertion, Manual feeder, Adjust height on touchscreen, Discharge defective products through inspection |
| Capacity | Crimping and inserting at both ends around 1000pcs/hr |
| Drive Mode | Mitsubishi SERVO MOTOR, Drive, IPC |
| Wire Size | 0.13mm²—4.0mm² |
| Mould Assembly Type | Assemble AS40, AS42, AE30( Customized Acceptable) |
| Wire Cutting Length | 280-9999mm |
| Cutting Precision | Cutting length<100mm,Error range 0.5mm+(Setup cutting length*0.002) |
| Stripping Length | Both sides(crimping ends)0-15mm |
| Penetraction Depth | MAX 3mm |
| Crimping Capacity | 3TON Servo mute specifications |
| Detection Device | Wire presence, Wire overload, Terminal presence, Terminal overload, Stripping and crimping visual monitoring, Pressure manager, Housing presence, Insertion error detection,Tinning surface detection |
| Power Source | 3 phase/380V/50Hz |
| Power | 10KW |
| Compressed Air | 0.5Mpa |
| Equipment Size | L3200*W4000*H1900mm |
| Weight | 1500KG |
Product Tags:
|
|
0.5Mpa 10KW Automatic Wire Cutting And Crimping Machine Multifunctional Images
|
